REGULATED HIGH VOLTAGE POWER SUPPLY
1kV to 150kV, 1.2kW to 2kW
REGULATED HIGH VOLTAGE POWER SUPPLY
1kV to 150kV, 1.2kW to 2kW
This series of power supplies can generate output that ranges from 1kV to 150kV, 1.2W to 2kW and are housed in compact 19” racks to give a highly regulated output.
TECHNICAL SPECIFICATIONS
PARAMETER | SPECIFICATION |
---|---|
Input Voltage | 230V ±10% A C, 50Hz, single phase |
Output Voltage Range* | 1kV DC to 150kV DC |
Output Power Range* | 1.2kW to 2kW |
Polarity* | Positive / Negative |
Line Regulation | Better than 0.05% for 10% variation in input voltage |
Load Regulation | Better than 0.05% for 0 to 100% load variation |
Ripple | 0.05% rms OR 0.1% rms at full rating |
Stability | Better than 0.01%/hour after 1 hour warm up |
Regulation Mode* | Constant voltage – Constant current |
Voltage & Current Control* | Local: By 10-turn potentiometers on the front panel Remote: 0 to 10V DC signals for voltage & current control; OR Control through computer interface |
Protections* | Against over load, over current, over voltage, short-circuit and arc |
Remote Controls & Signals through Pluggable Connector /D-Connector (External RS232 Microcontroller Module) * | 10V DC reference 10V DC HV enable signal 0 to 10V DC signal for voltage & current control 0 to 10V DC signal for voltage & current monitoring |
Front Panel | AC power ON/OFF switch with indication HV ON/OFF switch with indication 3½ dig it voltage and current meters 10-turn potentiometers for voltage and current control Constant voltage – constant current mode indication |
Back Panel | Socket for mains input with 250V, 10A/20A 3 conductor power cord of 1.5 meters Fuse holder with fuse Terminal for HV output with 10ft of detachable high voltage cable Stud for grounding the unit Remote interface connector* |
Topology | High frequency resonant / PWM-controlled switch mode |
Switching Device | IGBT |
Cabinet | 3U to 6U 19” rack mountable, powder coated |
*Optional. To be specified by the user.