REGULATED HIGH VOLTAGE MODULE
(1kV to 10kV, 10W)
REGULATED HIGH VOLTAGE MODULE
1kV to 10kV, 10W
This series of power supplies incorporate the high frequency switch mode technology to give highly regulated panel mountable portable units with kV range varying from 1kV to 10kV catering to a wide variety of scientific and industrial applications.
Download Datasheet 
TECHNICAL SPECIFICATIONS
| PARAMETER | SPECIFICATION |
|---|---|
| Input Voltage | 230V AC, ±10%, 50Hz |
| Output Voltage Range* | 1kV to 10kV DC |
| Output Current Range* | 0.5mA / 1mA |
| Output Power Range | Upto 10W |
| Polarity* | Positive / Negative |
| Ripple | ≤0.1% rms at rated output |
| Line Regulation | < 0.05% for ±10% variation in input voltage |
| Load Regulation | < 0.1% for 10 to 100% load variation |
| Stability | < 0.05% hour after 1 hour warm up |
| Regulating Mode | Constant voltage-Constant current |
| Voltage & Current Control | By external 0 to10-turn potentiometer with lockable counting dial |
| Protections | Against flash over to ground and short-circuit |
| Controls & Signals through Pluggable Connector | 10V DC reference 0 to 10V DC signals for voltage & current control 0V to 10V DC signals for voltage & current monitoring HV enable (Active low) |
| RFront Panel | 3 way 0.2” pluggable connector for 230V AC input Fuse holder with 10A fuse 12 way 0.2” pluggable connector for output controls |
| Back Panel | Terminal for HV output with 1meter of detachable high voltage cable A stud for grounding the power supply |
| Topology | High frequency PWM-controlled switch mode type |
| Switching Device | MOSFET |
*To be specified by the customer
# For remote operation RS232 available at an extra cost