PULSED-DC POWER SUPPLY
500W / 1KW / 2KW / 5KW
PULSED-DC POWER SUPPLY
500W / 1kW / 2kW / 5kW
This series of power supplies integrate DC power supply with pulsing components to give a compact unit for ease of operation. General applications include sputtering, electroplating, plasma research, etc.
Download Datasheet
TECHNICAL SPECIFICATIONS
| PARAMETER | SPECIFICATION | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Input Voltage | 230V ±10% AC, 50Hz, single phase for output power ≤ 2kW 415V ±10% AC, 50Hz, three phase for output power > 2kW | ||||||||||||
| Output Voltage Range* |
|
||||||||||||
| Output Power | 500W/1kW / 2kW / 5kW | ||||||||||||
| Polarity* | Negative | ||||||||||||
| Mode of Operation | Pulse / Continuous | ||||||||||||
| Ignition Voltage | 1200 DC max. | ||||||||||||
| Pulse Frequency | 1kHz to 100kHz variable | ||||||||||||
| Duty Cycle | 10% to 80% | ||||||||||||
| Regulating Mode | Constant Voltage – Constant Current | ||||||||||||
|
|
||||||||||||
| Settings & Readouts (Through front panel console ) | Settings-Voltage, Current, Frequency, Duty Cycle Read-outs- Voltage, Current, Frequency, Duty Cycle Faults- OV, OC, OT |
||||||||||||
| Protections* | Against overload, over voltage, over temperature and short-circuit | ||||||||||||
| Front Panel | Power ON/OFF switch / MCB ON/OFF Main ON indication Console |
||||||||||||
| Back Panel | Socket for mains input with 250V, 10A/20A 3 conductor power cord of 1.5 meters / Terminal blocks for 3 phase input Fuse holder with fuse Stud for grounding the unit Terminal block / High voltage connector for output. |
||||||||||||
| Topology | PWM-controlled switch mode | ||||||||||||
| Switching Device | IGBT | ||||||||||||
| Cabinet | 19” rack, powder coated |
*Optional. To be specified by the user.